Máy khuấy hòa tan keo trong sản xuất dầu nhớt DS2500

If you thought it couldn’t be done, think again. Silverson’s mighty Disintegrator 2500 mixing system will disintegrate, solubilise or disperse the largest of solids - up to 1 metre across - in a single operation, and in times you wouldn’t believe.

The Disintegrator 2500 incorporates a powerful and unique Silverson mixer located in the bottom of a custom-built vessel. The mixer exerts a massive suction downwards from the surface of the liquid, pulling down even the most buoyant of solids, no matter what the size. These solids are literally ripped apart and dispersed throughout the mix, and with the refinement of a Silverson In-Line mixer included in the system, are totally solubilised or suspended.

For smaller solids, Silverson offers the Duplex Disintegrator/ Dissolver, which was specifically developed for the disintegration and solubilisation of solid rubbers and polymers for the lube oil and adhesive industries.

Technical information

Capacity: 1,000 to 100,000 litres
Components: Silverson Disintegrator 2500 systems typically include:
Silverson Bottom Entry Disintegrator/Dissolver – provides rapid disintegration of solids and wetting of powders and is the prime mover of the fluid in the vessel.
Silverson In-Line High Shear Mixer – maximises the solution of the fine particles created by the Bottom Entry unit and allows for instant homogenisation of additive fluids.
Special Disintegrator 2500 vessel, associated piping, valves, fittings and controls – optimises mixing characteristics to suit application needs.

Typical Applications
Rapid solution of rubber and polymer blocks into lubricating oils, solvents and bitumen for the production of VM luboils, adhesives and polymer modified bitumen for road surfacing.
Recovery of waste candy.
Wet crumbing of waste rubber.
Rapid dispersion of large volumes of powder or materials which are difficult to wet out and have a tendency to “raft.”
Dispersion of filter cakes.